diff options
Diffstat (limited to 'arduinoAnalogStomp')
24 files changed, 0 insertions, 1310 deletions
diff --git a/arduinoAnalogStomp/.gitignore b/arduinoAnalogStomp/.gitignore deleted file mode 100644 index d900568..0000000 --- a/arduinoAnalogStomp/.gitignore +++ /dev/null @@ -1 +0,0 @@ -build-uno diff --git a/arduinoAnalogStomp/Arduino.mk b/arduinoAnalogStomp/Arduino.mk deleted file mode 100755 index 09819ac..0000000 --- a/arduinoAnalogStomp/Arduino.mk +++ /dev/null @@ -1,720 +0,0 @@ -######################################################################## -# -# Arduino command line tools Makefile -# System part (i.e. project independent) -# -# Copyright (C) 2010,2011,2012 Martin Oldfield <m@mjo.tc>, based on -# work that is copyright Nicholas Zambetti, David A. Mellis & Hernando -# Barragan. -# -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU Lesser General Public License as -# published by the Free Software Foundation; either version 2.1 of the -# License, or (at your option) any later version. -# -# Adapted from Arduino 0011 Makefile by M J Oldfield -# -# Original Arduino adaptation by mellis, eighthave, oli.keller -# -# Version 0.1 17.ii.2009 M J Oldfield -# -# 0.2 22.ii.2009 M J Oldfield -# - fixes so that the Makefile actually works! -# - support for uploading via ISP -# - orthogonal choices of using the Arduino for -# tools, libraries and uploading -# -# 0.3 21.v.2010 M J Oldfield -# - added proper license statement -# - added code from Philip Hands to reset -# Arduino prior to upload -# -# 0.4 25.v.2010 M J Oldfield -# - tweaked reset target on Philip Hands' advice -# -# 0.5 23.iii.2011 Stefan Tomanek -# - added ad-hoc library building -# 17.v.2011 M J Oldfield -# - grabbed said version from Ubuntu -# -# 0.6 22.vi.2011 M J Oldfield -# - added ard-parse-boards supports -# - added -lc to linker opts, -# on Fabien Le Lez's advice -# -# 0.7 12.vii.2011 M J Oldfield -# - moved -lm to the end of linker opts, -# to solve Frank Knopf's problem; -# - added -F to stty opts: Craig Hollabaugh -# reckons it's good for Ubuntu -# -# 0.8 12.ii.2012 M J Oldfield -# - Patches for Arduino 1.0 IDE: -# support .ino files; -# handle board 'variants'; -# tweaked compile flags. -# - Build a library from all the system -# supplied code rather than linking the .o -# files directly. -# - Let TARGET default to current directory -# as per Daniele Vergini's patch. -# - Add support for .c files in system -# libraries: Dirk-Willem van Gulik and Evan -# Goldenberg both reported this and -# provided patches in the same spirit. -# -# 0.9 26.iv.2012 M J Oldfield -# - Allow the punter to specify boards.txt -# file and parser independently (after -# Peplin and Brotchie on github) -# - Support user libraries (Peplin's patch) -# - Remove main.cpp if NO_CORE_MAIN_CPP is -# defined (ex Peplin) -# - Added a monitor target which talks to the -# Arduino serial port (Peplin's suggestion) -# - Rejigged PATH calculations for general -# tidiness (ex Peplin) -# - Moved the reset target to Perl for -# clarity and better error handling (ex -# Daniele Vergini) -# -# 0.10 17.ix.12 M J Oldfield -# - Added installation notes for Fedora (ex Rickard Lindberg). -# - Changed size target so that it looks at the ELF object, -# not the hexfile (ex Jared Szechy and Scott Howard). -# - Fixed ARDUNIO typo in README.md (ex Kalin Kozhuharov). -# - Tweaked OBJDIR handling (ex Matthias Urlichs and Scott Howard). -# - Changed the name of the Debian/Ubuntu package (ex -# Scott Howard). -# - Only set AVRDUDE_CONF if it's not set (ex Tom Hall). -# - Added support for USB_PID/VID used by the Leonardo (ex Dan -# Villiom Podlaski Christiansen and Marc Plano-Lesay). -# -######################################################################## -# -# PATHS YOU NEED TO SET UP -# -# I've reworked the way paths to executables are constructed in this -# version (0.9) of the Makefile. -# -# We need to worry about three different sorts of file: -# -# 1. Things which are included in this distribution e.g. ard-parse-boards -# => ARDMK_DIR -# -# 2. Things which are always in the Arduino distribution e.g. -# boards.txt, libraries, &c. -# => ARDUINO_DIR -# -# 3. Things which might be bundled with the Arduino distribution, but -# might come from the system. Most of the toolchain is like this: -# on Linux it's supplied by the system. -# => AVR_TOOLS_DIR -# -# Having set these three variables, we can work out the rest assuming -# that things are canonically arranged beneath the directories defined -# above. -# -# On the Mac you might want to set: -# -# ARDUINO_DIR = /Applications/Arduino.app/Contents/Resources/Java -# ARDMK_DIR = /usr/local -# -# On Linux, you might prefer: -# -# ARDUINO_DIR = /usr/share/arduino -# ARDMK_DIR = /usr/local -# AVR_TOOLS_DIR = /usr -# -# You can either set these up in the Makefile, or put them in your -# environment e.g. in your .bashrc -# -# If you don't install the ard-... binaries to /usr/local/bin, but -# instead copy them to e.g. /home/mjo/arduino.mk/bin then set -# ARDML_DIR = /home/mjo/arduino.mk -# -######################################################################## -# -# DEPENDENCIES -# -# The Perl programs need a couple of libraries: -# YAML -# Device::SerialPort -# -######################################################################## -# -# STANDARD ARDUINO WORKFLOW -# -# Given a normal sketch directory, all you need to do is to create -# a small Makefile which defines a few things, and then includes this one. -# -# For example: -# -# ARDUINO_LIBS = Ethernet Ethernet/utility SPI -# BOARD_TAG = uno -# ARDUINO_PORT = /dev/cu.usb* -# -# include /usr/local/share/Arduino.mk -# -# Hopefully these will be self-explanatory but in case they're not: -# -# ARDUINO_LIBS - A list of any libraries used by the sketch (we -# assume these are in -# $(ARDUINO_DIR)/hardware/libraries -# -# ARDUINO_PORT - The port where the Arduino can be found (only needed -# when uploading -# -# BOARD_TAG - The ard-parse-boards tag for the board e.g. uno or mega -# 'make show_boards' shows a list -# -# Once this file has been created the typical workflow is just -# -# $ make upload -# -# All of the object files are created in the build-cli subdirectory -# All sources should be in the current directory and can include: -# - at most one .pde or .ino file which will be treated as C++ after -# the standard Arduino header and footer have been affixed. -# - any number of .c, .cpp, .s and .h files -# -# Included libraries are built in the build-cli/libs subdirectory. -# -# Besides make upload you can also -# make - no upload -# make clean - remove all our dependencies -# make depends - update dependencies -# make reset - reset the Arduino by tickling DTR on the serial port -# make raw_upload - upload without first resetting -# make show_boards - list all the boards defined in boards.txt -# make monitor - connect to the Arduino's serial port -# -######################################################################## -# -# SERIAL MONITOR -# -# The serial monitor just invokes the GNU screen program with suitable -# options. For more information see screen (1) and search for -# 'character special device'. -# -# The really useful thing to know is that ^A-k gets you out! -# -# The fairly useful thing to know is that you can bind another key to -# escape too, by creating $HOME{.screenrc} containing e.g. -# -# bindkey ^C kill -# -# If you want to change the baudrate, just set MONITOR_BAUDRATE. If you -# don't set it, it defaults to 9600 baud. -# -######################################################################## -# -# PATHS -# -# I've reworked the way paths to executables are constructed in this -# version of Makefile. -# -# We need to worry about three different sorts of file: -# -# 1. Things which are included in this distribution e.g. ard-parse-boards -# => ARDMK_DIR -# -# 2. Things which are always in the Arduino distribution e.g. -# boards.txt, libraries, &c. -# => ARDUINO_DIR -# -# 3. Things which might be bundled with the Arduino distribution, but -# might come from the system. Most of the toolchain is like this: -# on Linux it's supplied by the system. -# => AVR_TOOLS_DIR -# -# Having set these three variables, we can work out the rest assuming -# that things are canonically arranged beneath the directories defined -# above. -# -# So, on the Mac you might want to set: -# -# ARDUINO_DIR = /Applications/Arduino.app/Contents/Resources/Java -# ARDMK_DIR = /usr/local -# -# On Linux, you might prefer: -# -# ARDUINO_DIR = /usr/share/arduino -# ARDMK_DIR = /usr/local -# AVR_TOOLS_DIR = /usr -# -# -# -# -######################################################################## -# -# ARDUINO WITH ISP -# -# You need to specify some details of your ISP programmer and might -# also need to specify the fuse values: -# -# ISP_PROG = -c stk500v2 -# ISP_PORT = /dev/ttyACM0 -# -# You might also need to set the fuse bits, but typically they'll be -# read from boards.txt, based on the BOARD_TAG variable: -# -# ISP_LOCK_FUSE_PRE = 0x3f -# ISP_LOCK_FUSE_POST = 0xcf -# ISP_HIGH_FUSE = 0xdf -# ISP_LOW_FUSE = 0xff -# ISP_EXT_FUSE = 0x01 -# -# I think the fuses here are fine for uploading to the ATmega168 -# without bootloader. -# -# To actually do this upload use the ispload target: -# -# make ispload -# -# -######################################################################## - -######################################################################## -# -# Default TARGET to cwd (ex Daniele Vergini) -ifndef TARGET -TARGET = $(notdir $(CURDIR)) -endif - -######################################################################## - -# -# Arduino version number -ifndef ARDUINO_VERSION -ARDUINO_VERSION = 100 -endif - -######################################################################## -# Arduino and system paths -# -ifdef ARDUINO_DIR - -ifndef AVR_TOOLS_DIR -AVR_TOOLS_DIR = $(ARDUINO_DIR)/hardware/tools/avr -# The avrdude bundled with Arduino can't find its config -ifndef AVRDUDE_CONF -AVRDUDE_CONF = $(AVR_TOOLS_DIR)/etc/avrdude.conf -endif -endif - -ifndef AVR_TOOLS_PATH -AVR_TOOLS_PATH = $(AVR_TOOLS_DIR)/bin -endif - -ARDUINO_LIB_PATH = $(ARDUINO_DIR)/libraries -ARDUINO_CORE_PATH = $(ARDUINO_DIR)/hardware/arduino/cores/arduino -ARDUINO_VAR_PATH = $(ARDUINO_DIR)/hardware/arduino/variants - -else - -echo $(error "ARDUINO_DIR is not defined") - -endif - -######################################################################## -# Makefile distribution path -# -ifdef ARDMK_DIR - -ifndef ARDMK_PATH -ARDMK_PATH = $(ARDMK_DIR)/bin -endif - -else - -echo $(error "ARDMK_DIR is not defined") - -endif - -######################################################################## -# Miscellanea -# -ifndef ARDUINO_SKETCHBOOK -ARDUINO_SKETCHBOOK = $(HOME)/sketchbook -endif - -ifndef USER_LIB_PATH -USER_LIB_PATH = $(ARDUINO_SKETCHBOOK)/libraries -endif - -######################################################################## -# Serial monitor (just a screen wrapper) -# -# Quite how to construct the monitor command seems intimately tied -# to the command we're using (here screen). So, read the screen docs -# for more information (search for 'character special device'). -# -ifndef MONITOR_BAUDRATE -MONITOR_BAUDRATE = 9600 -endif - -ifndef MONITOR_CMD -MONITOR_CMD = screen -endif - -######################################################################## -# Reset -ifndef RESET_CMD -RESET_CMD = $(ARDMK_PATH)/ard-reset-arduino $(ARD_RESET_OPTS) -endif - -######################################################################## -# boards.txt parsing -# -ifndef BOARD_TAG -BOARD_TAG = uno -endif - -ifndef BOARDS_TXT -BOARDS_TXT = $(ARDUINO_DIR)/hardware/arduino/boards.txt -endif - -ifndef PARSE_BOARD -PARSE_BOARD = $(ARDMK_PATH)/ard-parse-boards -endif - -ifndef PARSE_BOARD_OPTS -PARSE_BOARD_OPTS = --boards_txt=$(BOARDS_TXT) -endif - -ifndef PARSE_BOARD_CMD -PARSE_BOARD_CMD = $(PARSE_BOARD) $(PARSE_BOARD_OPTS) -endif - -# Which variant ? This affects the include path -ifndef VARIANT -VARIANT = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) build.variant) -endif - -# processor stuff -ifndef MCU -MCU = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) build.mcu) -endif - -ifndef F_CPU -F_CPU = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) build.f_cpu) -endif - -# USB IDs for the Leonardo -ifndef USB_VID -USB_VID = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) build.vid) -endif - -ifndef USB_PID -USB_PID = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) build.pid) -endif - -# normal programming info -ifndef AVRDUDE_ARD_PROGRAMMER -AVRDUDE_ARD_PROGRAMMER = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) upload.protocol) -endif - -ifndef AVRDUDE_ARD_BAUDRATE -AVRDUDE_ARD_BAUDRATE = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) upload.speed) -endif - -# fuses if you're using e.g. ISP -ifndef ISP_LOCK_FUSE_PRE -ISP_LOCK_FUSE_PRE = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) bootloader.unlock_bits) -endif - -ifndef ISP_LOCK_FUSE_POST -ISP_LOCK_FUSE_POST = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) bootloader.lock_bits) -endif - -ifndef ISP_HIGH_FUSE -ISP_HIGH_FUSE = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) bootloader.high_fuses) -endif - -ifndef ISP_LOW_FUSE -ISP_LOW_FUSE = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) bootloader.low_fuses) -endif - -ifndef ISP_EXT_FUSE -ISP_EXT_FUSE = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) bootloader.extended_fuses) -endif - -# Everything gets built in here (include BOARD_TAG now) -ifndef OBJDIR -OBJDIR = build-$(BOARD_TAG) -endif - -######################################################################## -# Local sources -# -LOCAL_C_SRCS = $(wildcard *.c) -LOCAL_CPP_SRCS = $(wildcard *.cpp) -LOCAL_CC_SRCS = $(wildcard *.cc) -LOCAL_PDE_SRCS = $(wildcard *.pde) -LOCAL_INO_SRCS = $(wildcard *.ino) -LOCAL_AS_SRCS = $(wildcard *.S) -LOCAL_OBJ_FILES = $(LOCAL_C_SRCS:.c=.o) $(LOCAL_CPP_SRCS:.cpp=.o) \ - $(LOCAL_CC_SRCS:.cc=.o) $(LOCAL_PDE_SRCS:.pde=.o) \ - $(LOCAL_INO_SRCS:.ino=.o) $(LOCAL_AS_SRCS:.S=.o) -LOCAL_OBJS = $(patsubst %,$(OBJDIR)/%,$(LOCAL_OBJ_FILES)) - -# Dependency files -DEPS = $(LOCAL_OBJS:.o=.d) - -# core sources -ifeq ($(strip $(NO_CORE)),) -ifdef ARDUINO_CORE_PATH -CORE_C_SRCS = $(wildcard $(ARDUINO_CORE_PATH)/*.c) -CORE_CPP_SRCS = $(wildcard $(ARDUINO_CORE_PATH)/*.cpp) - -ifneq ($(strip $(NO_CORE_MAIN_CPP)),) -CORE_CPP_SRCS := $(filter-out %main.cpp, $(CORE_CPP_SRCS)) -endif - -CORE_OBJ_FILES = $(CORE_C_SRCS:.c=.o) $(CORE_CPP_SRCS:.cpp=.o) -CORE_OBJS = $(patsubst $(ARDUINO_CORE_PATH)/%, \ - $(OBJDIR)/%,$(CORE_OBJ_FILES)) -endif -endif - - -######################################################################## -# Rules for making stuff -# - -# The name of the main targets -TARGET_HEX = $(OBJDIR)/$(TARGET).hex -TARGET_ELF = $(OBJDIR)/$(TARGET).elf -TARGETS = $(OBJDIR)/$(TARGET).* -CORE_LIB = $(OBJDIR)/libcore.a - -# A list of dependencies -DEP_FILE = $(OBJDIR)/depends.mk - -# Names of executables -CC = $(AVR_TOOLS_PATH)/avr-gcc -CXX = $(AVR_TOOLS_PATH)/avr-g++ -OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy -OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump -AR = $(AVR_TOOLS_PATH)/avr-ar -SIZE = $(AVR_TOOLS_PATH)/avr-size -NM = $(AVR_TOOLS_PATH)/avr-nm -REMOVE = rm -f -MV = mv -f -CAT = cat -ECHO = echo - -# General arguments -SYS_LIBS = $(patsubst %,$(ARDUINO_LIB_PATH)/%,$(ARDUINO_LIBS)) -USER_LIBS = $(patsubst %,$(USER_LIB_PATH)/%,$(ARDUINO_LIBS)) -SYS_INCLUDES = $(patsubst %,-I%,$(SYS_LIBS)) -USER_INCLUDES = $(patsubst %,-I%,$(USER_LIBS)) -LIB_C_SRCS = $(wildcard $(patsubst %,%/*.c,$(SYS_LIBS))) -LIB_CPP_SRCS = $(wildcard $(patsubst %,%/*.cpp,$(SYS_LIBS))) -USER_LIB_CPP_SRCS = $(wildcard $(patsubst %,%/*.cpp,$(USER_LIBS))) -USER_LIB_C_SRCS = $(wildcard $(patsubst %,%/*.c,$(USER_LIBS))) -LIB_OBJS = $(patsubst $(ARDUINO_LIB_PATH)/%.c,$(OBJDIR)/libs/%.o,$(LIB_C_SRCS)) \ - $(patsubst $(ARDUINO_LIB_PATH)/%.cpp,$(OBJDIR)/libs/%.o,$(LIB_CPP_SRCS)) -USER_LIB_OBJS = $(patsubst $(USER_LIB_PATH)/%.cpp,$(OBJDIR)/libs/%.o,$(USER_LIB_CPP_SRCS)) \ - $(patsubst $(USER_LIB_PATH)/%.c,$(OBJDIR)/libs/%.o,$(USER_LIB_C_SRCS)) - -CPPFLAGS = -mmcu=$(MCU) -DF_CPU=$(F_CPU) -DARDUINO=$(ARDUINO_VERSION) \ - -I. -I$(ARDUINO_CORE_PATH) -I$(ARDUINO_VAR_PATH)/$(VARIANT) \ - $(SYS_INCLUDES) $(USER_INCLUDES) -g -Os -w -Wall \ - -DUSB_VID=$(USB_VID) -DUSB_PID=$(USB_PID) \ - -ffunction-sections -fdata-sections - -CFLAGS = -std=gnu99 -CXXFLAGS = -fno-exceptions -ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp -LDFLAGS = -mmcu=$(MCU) -Wl,--gc-sections -Os - -# Expand and pick the first port -ARD_PORT = $(firstword $(wildcard $(ARDUINO_PORT))) - -# Implicit rules for building everything (needed to get everything in -# the right directory) -# -# Rather than mess around with VPATH there are quasi-duplicate rules -# here for building e.g. a system C++ file and a local C++ -# file. Besides making things simpler now, this would also make it -# easy to change the build options in future - -# library sources -$(OBJDIR)/libs/%.o: $(ARDUINO_LIB_PATH)/%.c - mkdir -p $(dir $@) - $(CC) -c $(CPPFLAGS) $(CFLAGS) $< -o $@ - -$(OBJDIR)/libs/%.o: $(ARDUINO_LIB_PATH)/%.cpp - mkdir -p $(dir $@) - $(CC) -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@ - -$(OBJDIR)/libs/%.o: $(USER_LIB_PATH)/%.cpp - mkdir -p $(dir $@) - $(CC) -c $(CPPFLAGS) $(CFLAGS) $< -o $@ - -$(OBJDIR)/libs/%.o: $(USER_LIB_PATH)/%.c - mkdir -p $(dir $@) - $(CC) -c $(CPPFLAGS) $(CFLAGS) $< -o $@ - -# normal local sources -# .o rules are for objects, .d for dependency tracking -# there seems to be an awful lot of duplication here!!! -$(OBJDIR)/%.o: %.c - $(CC) -c $(CPPFLAGS) $(CFLAGS) $< -o $@ - -$(OBJDIR)/%.o: %.cc - $(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@ - -$(OBJDIR)/%.o: %.cpp - $(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@ - -$(OBJDIR)/%.o: %.S - $(CC) -c $(CPPFLAGS) $(ASFLAGS) $< -o $@ - -$(OBJDIR)/%.o: %.s - $(CC) -c $(CPPFLAGS) $(ASFLAGS) $< -o $@ - -$(OBJDIR)/%.d: %.c - $(CC) -MM $(CPPFLAGS) $(CFLAGS) $< -MF $@ -MT $(@:.d=.o) - -$(OBJDIR)/%.d: %.cc - $(CXX) -MM $(CPPFLAGS) $(CXXFLAGS) $< -MF $@ -MT $(@:.d=.o) - -$(OBJDIR)/%.d: %.cpp - $(CXX) -MM $(CPPFLAGS) $(CXXFLAGS) $< -MF $@ -MT $(@:.d=.o) - -$(OBJDIR)/%.d: %.S - $(CC) -MM $(CPPFLAGS) $(ASFLAGS) $< -MF $@ -MT $(@:.d=.o) - -$(OBJDIR)/%.d: %.s - $(CC) -MM $(CPPFLAGS) $(ASFLAGS) $< -MF $@ -MT $(@:.d=.o) - -# the pde -> cpp -> o file -$(OBJDIR)/%.cpp: %.pde - $(ECHO) '#include "WProgram.h"' > $@ - $(CAT) $< >> $@ - -# the ino -> cpp -> o file -$(OBJDIR)/%.cpp: %.ino - $(ECHO) '#include <Arduino.h>' > $@ - $(CAT) $< >> $@ - -$(OBJDIR)/%.o: $(OBJDIR)/%.cpp - $(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@ - -$(OBJDIR)/%.d: $(OBJDIR)/%.cpp - $(CXX) -MM $(CPPFLAGS) $(CXXFLAGS) $< -MF $@ -MT $(@:.d=.o) - -# core files -$(OBJDIR)/%.o: $(ARDUINO_CORE_PATH)/%.c - $(CC) -c $(CPPFLAGS) $(CFLAGS) $< -o $@ - -$(OBJDIR)/%.o: $(ARDUINO_CORE_PATH)/%.cpp - $(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@ - -# various object conversions -$(OBJDIR)/%.hex: $(OBJDIR)/%.elf - $(OBJCOPY) -O ihex -R .eeprom $< $@ - -$(OBJDIR)/%.eep: $(OBJDIR)/%.elf - -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --change-section-lma .eeprom=0 -O ihex $< $@ - -$(OBJDIR)/%.lss: $(OBJDIR)/%.elf - $(OBJDUMP) -h -S $< > $@ - -$(OBJDIR)/%.sym: $(OBJDIR)/%.elf - $(NM) -n $< > $@ - -######################################################################## -# -# Avrdude -# -ifndef AVRDUDE -AVRDUDE = $(AVR_TOOLS_PATH)/avrdude -endif - -AVRDUDE_COM_OPTS = -q -V -p $(MCU) -ifdef AVRDUDE_CONF -AVRDUDE_COM_OPTS += -C $(AVRDUDE_CONF) -endif - -AVRDUDE_ARD_OPTS = -c $(AVRDUDE_ARD_PROGRAMMER) -b $(AVRDUDE_ARD_BAUDRATE) -P $(ARD_PORT) - -ifndef ISP_PROG -ISP_PROG = -c stk500v2 -endif - -AVRDUDE_ISP_OPTS = -P $(ISP_PORT) $(ISP_PROG) - - -######################################################################## -# -# Explicit targets start here -# - -all: $(OBJDIR) $(TARGET_HEX) - -$(OBJDIR): - mkdir $(OBJDIR) - -$(TARGET_ELF): $(LOCAL_OBJS) $(CORE_LIB) $(OTHER_OBJS) - $(CC) $(LDFLAGS) -o $@ $(LOCAL_OBJS) $(CORE_LIB) $(OTHER_OBJS) -lc -lm - -$(CORE_LIB): $(CORE_OBJS) $(LIB_OBJS) $(USER_LIB_OBJS) - $(AR) rcs $@ $(CORE_OBJS) $(LIB_OBJS) $(USER_LIB_OBJS) - -$(DEP_FILE): $(OBJDIR) $(DEPS) - cat $(DEPS) > $(DEP_FILE) - -upload: reset raw_upload - -raw_upload: $(TARGET_HEX) - $(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ARD_OPTS) \ - -U flash:w:$(TARGET_HEX):i - -reset: - $(RESET_CMD) $(ARD_PORT) - -# stty on MacOS likes -F, but on Debian it likes -f redirecting -# stdin/out appears to work but generates a spurious error on MacOS at -# least. Perhaps it would be better to just do it in perl ? -reset_stty: - for STTYF in 'stty -F' 'stty --file' 'stty -f' 'stty <' ; \ - do $$STTYF /dev/tty >/dev/null 2>/dev/null && break ; \ - done ;\ - $$STTYF $(ARD_PORT) hupcl ;\ - (sleep 0.1 || sleep 1) ;\ - $$STTYF $(ARD_PORT) -hupcl - -ispload: $(TARGET_HEX) - $(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ISP_OPTS) -e \ - -U lock:w:$(ISP_LOCK_FUSE_PRE):m \ - -U hfuse:w:$(ISP_HIGH_FUSE):m \ - -U lfuse:w:$(ISP_LOW_FUSE):m \ - -U efuse:w:$(ISP_EXT_FUSE):m - $(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ISP_OPTS) -D \ - -U flash:w:$(TARGET_HEX):i - $(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ISP_OPTS) \ - -U lock:w:$(ISP_LOCK_FUSE_POST):m - -clean: - $(REMOVE) $(LOCAL_OBJS) $(CORE_OBJS) $(LIB_OBJS) $(CORE_LIB) $(TARGETS) $(DEP_FILE) $(DEPS) $(USER_LIB_OBJS) - -depends: $(DEPS) - cat $(DEPS) > $(DEP_FILE) - -size: $(OBJDIR) $(TARGET_ELF) - $(SIZE) -C --mcu=$(MCU) $(TARGET_ELF) - -show_boards: - $(PARSE_BOARD_CMD) --boards - -monitor: - $(MONITOR_CMD) $(ARD_PORT) $(MONITOR_BAUDRATE) - -.PHONY: all clean depends upload raw_upload reset reset_stty size show_boards monitor - -include $(DEP_FILE) diff --git a/arduinoAnalogStomp/Makefile b/arduinoAnalogStomp/Makefile deleted file mode 100755 index e273ddf..0000000 --- a/arduinoAnalogStomp/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -ARDUINO_DIR= /usr/share/arduino -ARDMK_DIR= . -AVR_TOOLS_DIR = /usr - -BOARD_TAG = uno -ARDUINO_PORT = /dev/cu.usb* -ARDUINO_LIBS = Ethernet Ethernet/utility SPI - -include Arduino.mk diff --git a/arduinoAnalogStomp/analogethernet.ino b/arduinoAnalogStomp/analogethernet.ino deleted file mode 100755 index feefbd8..0000000 --- a/arduinoAnalogStomp/analogethernet.ino +++ /dev/null @@ -1,204 +0,0 @@ -#include <SPI.h> -#include <Ethernet.h> - -byte mac[] = { 0xAD, 0xEE, 0x00, 0xEF, 0xFE, 0xED }; -const char *serverHost = "stomp.xapek.org"; -const int serverPort = 61613; -const char *serverLogin = "arduino1"; -const char *serverPasscode = "arduino1"; -const char *serverQueue = "/queue/queue-put"; - -const int ledPin = 13; // select the pin for the LED - -struct StompHeader { - const char *name; - const char *value; -}; - -class StompClient; // Forward - -struct StompFrame { - const char *command; - struct StompHeader *headers = 0; - int headersPos = -1; - const char *body = 0; - void (*bodyFunc)(class StompClient&) = NULL; - void addHeader(const char *name, const char *value) { - headersPos++; - headers = (StompHeader*)realloc(headers, sizeof(StompHeader) * (headersPos+1)); - memset(headers + headersPos, 0, sizeof(StompHeader)); - (headers+(sizeof(StompHeader)*headersPos))->name = name; - (headers+(sizeof(StompHeader)*headersPos))->value = value; - } - void setBody(const char *b) { - body = strdup(b); - } - StompFrame(const char *command) : command(strdup(command)) {}; - ~StompFrame() { - if (headers != NULL) - delete headers; - delete command; - if (body) - delete body; - } -}; - -class StompClient : public EthernetClient { - const char *serverHost; - int serverPort; - const char *serverLogin = NULL; - const char *serverPasscode = NULL; -public: - StompClient(const char *serverHost, int serverPort, const char *serverLogin, const char *serverPasscode) : - serverHost(serverHost), serverPort(serverPort), serverLogin(serverLogin), serverPasscode(serverPasscode) {}; - int connect() { - int result = EthernetClient::connect(serverHost, serverPort); - if (result) { - StompFrame frame("CONNECT"); - frame.addHeader("host", serverHost); - if (serverLogin) frame.addHeader("login", serverLogin); - if (serverPasscode) frame.addHeader("passcode", serverPasscode); - - send(frame); - - StompFrame *answer = readFrame(); - if (strcmp(answer->command, "CONNECTED") != 0) { - Serial.print("Got no CONNECTED Frame, read: "); - Serial.println(answer->command); - stop(); - delete answer; - return false; - } else { - delete answer; - return true; - } - } else { - return result; - } - }; - void send(StompFrame &frame) { - EthernetClient::print(frame.command); - EthernetClient::print("\n"); - for (int i = 0; i<=frame.headersPos; i++) { - StompHeader *header = frame.headers+sizeof(StompHeader)*i; - EthernetClient::print(header->name); - EthernetClient::print(":"); - EthernetClient::print(header->value); - EthernetClient::print("\n"); - } - EthernetClient::print("\n"); - if (frame.bodyFunc) { - frame.bodyFunc(*this); - } if (frame.body) { - EthernetClient::print(frame.body); - } - EthernetClient::write((byte)0); - }; - - void sendKeyValue(const char *key, const char *value) { - EthernetClient::print(key); - EthernetClient::print("="); - EthernetClient::print(value); - EthernetClient::print("\n"); - } - StompFrame *readFrame() { - char buf[255]; - int i = readBytesUntil('\n', buf, 254); - buf[i] = '\0'; - StompFrame *frame = new StompFrame(buf); - - while (readBytesUntil('\n', buf, 255)) { - //read header - //ignore - } - readBytesUntil('\0', buf, 255); - frame->setBody(buf); - - flush(); - return frame; - } -}; - - - - - -const long ADC_REF_MV = 3300; -const long ADC_MAX_STEP = 1024; -const long OV_FACTOR = 4; // Op. Verstärker Faktor = 4; 10mV = 1dB - -void sendPinValue(class StompClient& c) { - long sensorValue, - sensorValueMV, - sensorValueDBA, - pinnr; - char buf[12]; - char *sensorKey = "arduino.aX", - *sensorKeyMV = "arduino.aX.mv", - *sensorKeyDBA = "arduino.aX.dba"; - for (int i = A0; i <= A5; i++) { - pinnr = i - A0; - - sensorValue = analogRead(i); - sensorKey[9] = '0' + pinnr; - snprintf(buf, 8, "%u", sensorValue); - c.sendKeyValue(sensorKey, buf); - - sensorValueMV = sensorValue * (ADC_REF_MV*100/ADC_MAX_STEP); - sensorKeyMV[9] = '0' + pinnr; - snprintf(buf, 8, "%ld.%03ld", sensorValueMV/100, sensorValue%100); - c.sendKeyValue(sensorKeyMV, buf); - - sensorValueDBA = sensorValueMV / OV_FACTOR; - sensorKeyDBA[9] = '0' + pinnr; - snprintf(buf, 12, "%ld.%04ld", sensorValueDBA/1000, sensorValueDBA%1000); - c.sendKeyValue(sensorKeyDBA, buf); - } -} - - -void setup() { - Serial.begin(9600); - - // declare the ledPin as an OUTPUT: - pinMode(ledPin, OUTPUT); - - // start the Ethernet and UDP: Use DHCP for IP-Configuration - Ethernet.begin(mac); - - analogReference(EXTERNAL); -} - - - -StompClient client(serverHost, serverPort, serverLogin, serverPasscode); - -void loop() { - unsigned long dt = millis(); - - digitalWrite(ledPin, HIGH); - if (client.connected()) { - Serial.println("Send packet"); - StompFrame frame("SEND"); - frame.addHeader("destination", serverQueue); - frame.bodyFunc = &sendPinValue; - client.send(frame); - } else { - Serial.println("connecting"); - client.stop(); - if (client.connect()) { - Serial.println("connected"); - } else { - Serial.println("connection failed"); - } - } - digitalWrite(ledPin, LOW); - - dt = (millis() - dt); - - if (dt < 500) { - Serial.println(String("sleep: ") + String((500-dt))); - delay(500 - dt); - } -} - diff --git a/arduinoAnalogStomp/bin/ard-parse-boards b/arduinoAnalogStomp/bin/ard-parse-boards deleted file mode 100755 index e2de71b..0000000 --- a/arduinoAnalogStomp/bin/ard-parse-boards +++ /dev/null @@ -1,261 +0,0 @@ -#! /usr/bin/perl - -use strict; -use warnings; - -use Getopt::Long; -use Pod::Usage; -use YAML; - -my %Opt = - ( - boards_txt => '/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/boards.txt', - ); - -GetOptions(\%Opt, - "boards_txt=s", # filename of the boards.txt file - "find!", # search for data - "dump!", # dump the whole database - "boards!", # dump a list of boards - "help!", - "info!", - ); - -if ($Opt{help} || $Opt{info}) - { - usage(); - } - -my $db = parse_boards($Opt{boards_txt}); - -if ($Opt{dump}) - { - dump_data("$Opt{boards_txt} contains:", $db); - } -elsif ($Opt{find}) - { - my @terms = @ARGV or usage(); - find_data($db, \@terms); - } -elsif ($Opt{boards}) - { - dump_boards($db); - } -else - { - my $tag = shift @ARGV or usage(); - - if (my $key = shift @ARGV) - { - die "$key isn't defined for the $tag board, " - unless $db->{$tag} && exists $db->{$tag}->{$key}; - - print $db->{$tag}->{$key}, "\n"; - } - else - { - die "The $tag board isn't defined, " - unless $db->{$tag}; - - dump_data("The $tag board:", $db->{$tag}); - } - } - -## here endeth the main - -sub usage - { - pod2usage(-verbose => 2); - } - -# return HoH: {board}->{field} = value -sub parse_boards - { - my $filename = shift; - - my %b; - - open(my $fh, '<', $filename) - or die "Can't open $filename, "; - - while(<$fh>) - { - my ($board, $key, $value) = /^\s*(\S+?)\.(\S+?)\s*=\s*(.+?)\s*$/ - or next; - - $b{$board}->{$key} = $value; - } - - return \%b; - } - -# A rudimentary search engine -sub find_data - { - my ($db, $term_list) = @_; - - my @q = map { qr/$_/i } @$term_list; - my $q = join(' && ', map { "/$_/i" } @$term_list); - - my %hit; - foreach my $b (keys %$db) - { - foreach my $k (keys %{$db->{$b}}) - { - my $v = $db->{$b}->{$k}; - $hit{$b}->{$k} = $v if !grep { $v !~ /$_/i } @q; - } - } - - dump_data("Matches for $q:", \%hit); - } - -# The list of boards... -sub dump_boards - { - my $db = shift or return; - - my %name; - my $max_l = 0; - foreach my $b (keys %$db) - { - $name{$b} = $db->{$b}->{name} || 'Anonymous'; - $max_l = length($b) if $max_l < length($b); - } - - my $fmt = sprintf("%%-%ds %%s\n", $max_l + 2); - - printf $fmt, "Tag", "Board Name"; - foreach my $b (sort keys %name) - { - printf $fmt, $b, $name{$b}; - } - } - - -# dump arbitrary data with a title -sub dump_data - { - my ($title, $data) = @_; - - print "# $title\n", Dump($data); - } - -__END__ - -=head1 NAME - -ard-parse-boards - Read data from the Arduino boards.txt file - -=head1 USAGE - - Dump all the data in the file: - $ ard-parse-boards --dump - - See which boards we know about: - $ ard-parse-boards --boards - - Look for a particular board... - $ ard-parse-boards --find uno - - ...multiple terms are implicitly ANDed: - $ ard-parse-boards --find duemil 328 - - Dump all the data for a particular board: - $ ard-parse-boards atmega328 - - Extract a particular field: - $ ard-parse-boards atmega328 build.f_cpu - -=head1 DESCRIPTION - -The Arduino software package ships with a boards.txt file which tells -the Arduino IDE details about particular hardware. So when the user -says he's got a shiny new Arduino Uno, boards.txt knows that it has a -16MHz ATmega328 on it. It would be nice to access these data from the -command line too. - -In normal operation you simply specify the tag given to the board in -the boards.txt file, and optionally a field name. This program then -extracts the data to STDOUT. - -Most boards have names which are quite unwieldy, so we always refer to -a board by a tag, not its name. Strictly the tag is the bit before the -first dot in the boards.txt key. You can see a list of board tags and -names with the C<--boards> option. - -=head1 OPTIONS - -=over - -=item --boards_txt=[file] - -Specify the full path to the boards.txt file. - -=back - -The following options all disable the normal 'lookup' operation. - -=over - -=item --dump - -Dump the complete database in YAML format. - -=item ---boards - -Print a list of the tag and name of every board in the file. - -=item --find [query] <query> ... - -Find matching data. Strictly, return a list of values which match all -of the query terms, treating each term as a case-insensitive regexp. - -For example: - -=over - -=item --find 328 - -List data containing 328 (anywhere in the value). - -=item --find due - -List data containing 'due' (e.g. duemilanove). - -=item --find 328 due - -List data containing both 328 and due. - -=back - -=back - -=head1 BUGS AND LIMITATIONS - -There are no known bugs in this application. - -Please report problems to the author. - -Patches are welcome. - -=head1 AUTHOR - -Martin Oldfield, ex-atelier@mjo.tc - -Thanks to Mark Sproul who suggested doing something like this to me ages ago. - -=head1 LICENCE AND COPYRIGHT - -Copyright (c) 2011, Martin Oldfield. All rights reserved. - -This file is free software; you can redistribute it and/or modify it -under the terms of the GNU Lesser General Public License as published -by the Free Software Foundation; either version 2.1 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - - diff --git a/arduinoAnalogStomp/bin/ard-reset-arduino b/arduinoAnalogStomp/bin/ard-reset-arduino deleted file mode 100755 index 22c7109..0000000 --- a/arduinoAnalogStomp/bin/ard-reset-arduino +++ /dev/null @@ -1,115 +0,0 @@ -#! /usr/bin/perl - -use strict; -use warnings; - -use Device::SerialPort; -use Getopt::Long; -use Pod::Usage; - -my %Opt = - ( - period => 0.1, - ); - -GetOptions(\%Opt, - "period=f", # width of reset pulse in seconds - "verbose!", - "help!", - "info!", - ); - -if ($Opt{help} || $Opt{info}) - { - usage(); - } - -die "No Arduinos found!\n" - unless @ARGV; - -foreach my $dev (@ARGV) - { - my $p = Device::SerialPort->new($dev) - or die "Unable to open $dev: $!\n"; - - my $dt = $Opt{period}; - - print STDERR "Setting DTR high for ${dt}s on $dev\n" - if $Opt{verbose}; - - die "Invalid pulse width ($dt), " - unless $dt > 0.0; - - $p->pulse_dtr_on($dt * 1000.0); - } - -## here endeth the main - -sub usage - { - pod2usage(-verbose => 2); - } - -__END__ - -=head1 NAME - -ard-reset-arduino - Reset an Arduino - -=head1 USAGE - - $ ard-reset-arduino /dev/cu.usb* - - $ ard-reset-arduino --verbose --period=0.1 /dev/cu.usb* - -=head1 DESCRIPTION - -To reset (most) Arduinos, it's enough to just pulse the DTR line. - -You can do that from the shell with stty, but there's an interesting -diversity of command flags. This little program gives a uniform interface -at the cost of requiring C<Device::SerialPort>. - -=head1 OPTIONS - -=over - -=item --verbose - -Watch what's going on on STDERR. - -=item --period=0.25 - -Specify the DTR pulse width in seconds. - -=back - -=head1 BUGS AND LIMITATIONS - -There are no known bugs in this application. - -Please report problems to the author. - -Patches are welcome. - -=head1 AUTHOR - -Martin Oldfield, ex-atelier@mjo.tc - -Thanks to Daniele Vergini who suggested this to me, and supplied -a command line version. - -=head1 LICENCE AND COPYRIGHT - -Copyright (c) 2012, Martin Oldfield. All rights reserved. - -This file is free software; you can redistribute it and/or modify it -under the terms of the GNU Lesser General Public License as published -by the Free Software Foundation; either version 2.1 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - - diff --git a/arduinoAnalogStomp/schaltung/Untitled Sketch.fzz b/arduinoAnalogStomp/schaltung/Untitled Sketch.fzz Binary files differdeleted file mode 100644 index a324e62..0000000 --- a/arduinoAnalogStomp/schaltung/Untitled Sketch.fzz +++ /dev/null diff --git a/arduinoAnalogStomp/schaltung/Untitled Sketch_Leiterplatte.pdf b/arduinoAnalogStomp/schaltung/Untitled Sketch_Leiterplatte.pdf Binary files differdeleted file mode 100644 index 013da3c..0000000 --- a/arduinoAnalogStomp/schaltung/Untitled Sketch_Leiterplatte.pdf +++ /dev/null diff --git a/arduinoAnalogStomp/schaltung/Untitled Sketch_Schaltplan.pdf b/arduinoAnalogStomp/schaltung/Untitled Sketch_Schaltplan.pdf Binary files differdeleted file mode 100644 index f504844..0000000 --- a/arduinoAnalogStomp/schaltung/Untitled Sketch_Schaltplan.pdf +++ /dev/null diff --git a/arduinoAnalogStomp/schaltung/Untitled Sketch_Steckplatine.pdf b/arduinoAnalogStomp/schaltung/Untitled Sketch_Steckplatine.pdf Binary files differdeleted file mode 100644 index 2b974da..0000000 --- a/arduinoAnalogStomp/schaltung/Untitled Sketch_Steckplatine.pdf +++ /dev/null diff --git a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_copper_bottom.pdf b/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_copper_bottom.pdf Binary files differdeleted file mode 100644 index b3fb204..0000000 --- a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_copper_bottom.pdf +++ /dev/null diff --git a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_copper_bottom_mirror.pdf b/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_copper_bottom_mirror.pdf Binary files differdeleted file mode 100644 index 9e43de3..0000000 --- a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_copper_bottom_mirror.pdf +++ /dev/null diff --git a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_copper_top.pdf b/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_copper_top.pdf Binary files differdeleted file mode 100644 index 9ab5881..0000000 --- a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_copper_top.pdf +++ /dev/null diff --git a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_copper_top_mirror.pdf b/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_copper_top_mirror.pdf Binary files differdeleted file mode 100644 index 09bccb5..0000000 --- a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_copper_top_mirror.pdf +++ /dev/null diff --git a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_mask_bottom.pdf b/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_mask_bottom.pdf Binary files differdeleted file mode 100644 index 11329ce..0000000 --- a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_mask_bottom.pdf +++ /dev/null diff --git a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_mask_bottom_mirror.pdf b/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_mask_bottom_mirror.pdf Binary files differdeleted file mode 100644 index 02a92f3..0000000 --- a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_mask_bottom_mirror.pdf +++ /dev/null diff --git a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_mask_top.pdf b/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_mask_top.pdf Binary files differdeleted file mode 100644 index 11329ce..0000000 --- a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_mask_top.pdf +++ /dev/null diff --git a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_mask_top_mirror.pdf b/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_mask_top_mirror.pdf Binary files differdeleted file mode 100644 index 02a92f3..0000000 --- a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_mask_top_mirror.pdf +++ /dev/null diff --git a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_paste_mask_bottom.pdf b/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_paste_mask_bottom.pdf Binary files differdeleted file mode 100644 index 479b7f1..0000000 --- a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_paste_mask_bottom.pdf +++ /dev/null diff --git a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_paste_mask_bottom_mirror.pdf b/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_paste_mask_bottom_mirror.pdf Binary files differdeleted file mode 100644 index 479b7f1..0000000 --- a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_paste_mask_bottom_mirror.pdf +++ /dev/null diff --git a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_paste_mask_top.pdf b/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_paste_mask_top.pdf Binary files differdeleted file mode 100644 index 479b7f1..0000000 --- a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_paste_mask_top.pdf +++ /dev/null diff --git a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_paste_mask_top_mirror.pdf b/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_paste_mask_top_mirror.pdf Binary files differdeleted file mode 100644 index 479b7f1..0000000 --- a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_paste_mask_top_mirror.pdf +++ /dev/null diff --git a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_silk_top.pdf b/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_silk_top.pdf Binary files differdeleted file mode 100644 index e4f9090..0000000 --- a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_silk_top.pdf +++ /dev/null diff --git a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_silk_top_mirror.pdf b/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_silk_top_mirror.pdf Binary files differdeleted file mode 100644 index e9558ba..0000000 --- a/arduinoAnalogStomp/schaltung/ätzen/Untitled Sketch_etch_silk_top_mirror.pdf +++ /dev/null |