/*
 * Copyright (c) 2007 Embedded Projects (http://www.embedded-projects.net)
 * Author: Benedikt Sauter <sauter@
 * All rights reserved.
 *
 * Short descripton of file:
 *
 *
 * Redistribution and use in source and binary forms, with or without 
 * modification, are permitted provided that the following conditions 
 * are met:
 *
 *   * Redistributions of source code must retain the above copyright 
 *     notice, this list of conditions and the following disclaimer.
 *   * Redistributions in binary form must reproduce the above 
 *     copyright notice, this list of conditions and the following 
 *     disclaimer in the documentation and/or other materials provided 
 *     with the distribution.
 *   * Neither the name of the FH Augsburg nor the names of its 
 *     contributors may be used to endorse or promote products derived 
 *     from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES{} LOSS OF USE, 
 * DATA, OR PROFITS{} OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include "common.h"
#include "protocol.h"
#include "io.h"

void io_parser(char *buf)
{
   switch(buf[0])
   {
      case CMD_IO_INIT_PORT:
         io_init_port_usb((uint8_t)buf[2]);
      break;
      case CMD_IO_INIT_PIN:
         io_init_usb((uint8_t)buf[2]);
      break;
      case CMD_IO_PORT_DIRECTION_IN:
         io_set_port_direction_in_usb((uint8_t)buf[2],(uint8_t)buf[3]);
      break;
      case CMD_IO_PORT_DIRECTION_OUT:
         io_set_port_direction_out_usb((uint8_t)buf[2],(uint8_t)buf[3]);
      break;
      case CMD_IO_PORT_DIRECTION_TRI:
         io_set_port_direction_tri_usb((uint8_t)buf[2],(uint8_t)buf[3]);
      break;
      case CMD_IO_PIN_DIRECTION_IN:
         io_set_pin_direction_in_usb((uint8_t)buf[2]);
      break;
      case CMD_IO_PIN_DIRECTION_OUT:
         io_set_pin_direction_out_usb((uint8_t)buf[2]);
      break;
      case CMD_IO_PIN_DIRECTION_TRI:
         io_set_pin_direction_tri_usb((uint8_t)buf[2]);
      break;
      case CMD_IO_PORT_SET:
         io_set_port_usb((uint8_t)buf[2],(uint8_t)buf[3]);
      break;
      case CMD_IO_PORT_GET:
         io_get_port_usb((uint8_t)buf[2]);
      break;
      case CMD_IO_PIN_SET:
         io_set_pin_usb((uint8_t)buf[2],(uint8_t)buf[3]);
      break;
      case CMD_IO_PIN_GET:
         io_get_pin_usb((uint8_t)buf[2]);
      break;
      default:
         answer[0] = buf[0];
         answer[1] = RSP_UNKOWN_CMD;
         answer[2] = 0;
         CommandAnswer(3);
   }
}

uint8_t io_init(uint8_t pin) 
{
   if ((pin >= 1 && pin <= 19) || (pin >= 26 && pin <= 44))
   {
      io_set_pin_direction_out(pin);
      return RSP_OK; 
   }
   return RSP_UNKOWN_PIN;
}

void io_init_usb(uint8_t pin)
{
   answer[0] = CMD_IO_INIT_PIN;
   answer[1] = (unsigned char)io_init(pin);
   answer[2] = 0;
   CommandAnswer(3);
}

uint8_t io_init_port(uint8_t port)
{
    /* TODO implement this function */
    return RSP_OK;
}

void io_init_port_usb(uint8_t port)
{
   answer[0] = CMD_IO_INIT_PORT;
   answer[1] = (unsigned char)io_init_port(port);
   answer[2] = 0;
   CommandAnswer(3);
}

uint8_t io_set_port_direction_out(uint8_t port,uint8_t mask)
{
    /* TODO
	switch (port)
	{
      case  1:   DDRB = mask; break;
      case  2:   DDRC = mask; break; // PC7 = /CS (output) - do we need to mask this ?
      case  3:   DDRD = mask; break;
      case  4:   DDRE = mask; break; // PE4 = INT4 (input) - do we need to mask this ?
      case  5:   DDRF = mask; break;
      default:   return RSP_UNKOWN_PIN;
	}
    */
	return RSP_OK;    
}

uint8_t io_set_port_direction_in(uint8_t port,uint8_t mask)
{
    /* TODO implement */
    return RSP_OK;
}

uint8_t io_set_port_direction_tri(uint8_t port,uint8_t mask)
{   
    /* TODO implement */
    return RSP_OK;
}

void io_set_port_direction_out_usb (uint8_t port, uint8_t mask)
{
   answer[0] = CMD_IO_PORT_DIRECTION_OUT;
   answer[1] = (unsigned char)io_set_port_direction_out (port, mask);
   answer[2] = 0;
   CommandAnswer(3);
}

void io_set_port_direction_in_usb(uint8_t port, uint8_t mask)
{
   answer[0] = CMD_IO_PORT_DIRECTION_IN;
   answer[1] = (unsigned char)io_set_port_direction_in (port, mask);
   answer[2] = 0;
   CommandAnswer(3);
}
void io_set_port_direction_tri_usb(uint8_t port, uint8_t mask)
{
   answer[0] = CMD_IO_PORT_DIRECTION_TRI;
   answer[1] = (unsigned char)io_set_port_direction_tri (port, mask);
   answer[2] = 0;
   CommandAnswer(3);
}


uint8_t io_set_pin_direction_out(uint8_t pin)
{
   if((pin >= 1 && pin <= 19) || (pin >=26 && pin <=44) )
   {
      octopus.ports[pin] = PIN_OUT;
       
      switch(pin)
      {
         case 1:   OX_DDR1 |=(1<<OX_P1); break;
         case 2:   OX_DDR2 |=(1<<OX_P2); break;
         case 3:   OX_DDR3 |=(1<<OX_P3); break;
         case 4:   OX_DDR4 |=(1<<OX_P4); break;
         case 5:   OX_DDR5 |=(1<<OX_P5); break;
         case 6:   OX_DDR6 |=(1<<OX_P6); break;
         case 7:   OX_DDR7 |=(1<<OX_P7); break;
         case 8:   OX_DDR8 |=(1<<OX_P8); break;
         case 9:   OX_DDR9 |=(1<<OX_P9); break;
         case 10:   OX_DDR10 |=(1<<OX_P10); break;
         case 11:   OX_DDR11 |=(1<<OX_P11); break;
         case 12:   OX_DDR12 |=(1<<OX_P12); break;
         case 13:   OX_DDR13 |=(1<<OX_P13); break;
         case 14:   OX_DDR14 |=(1<<OX_P14); break;
         case 15:   OX_DDR15 |=(1<<OX_P15); break;
         case 16:   OX_DDR16 |=(1<<OX_P16); break;
         case 17:   OX_DDR17 |=(1<<OX_P17); break;
         case 18:   OX_DDR18 |=(1<<OX_P18); break;
         case 19:   OX_DDR19 |=(1<<OX_P19); break;
         
         case 26:   OX_DDR26 |=(1<<OX_P26); break;
         case 27:   OX_DDR27 |=(1<<OX_P27); break;
         case 28:   OX_DDR28 |=(1<<OX_P28); break;
         case 29:   OX_DDR29 |=(1<<OX_P29); break;
         case 30:   OX_DDR30 |=(1<<OX_P30); break;
         case 31:   OX_DDR31 |=(1<<OX_P31); break;
         case 32:   OX_DDR32 |=(1<<OX_P32); break;
         case 33:   OX_DDR33 |=(1<<OX_P33); break;
         case 34:   OX_DDR34 |=(1<<OX_P34); break;
         case 35:   OX_DDR35 |=(1<<OX_P35); break;
         case 36:   OX_DDR36 |=(1<<OX_P36); break;
         case 37:   OX_DDR37 |=(1<<OX_P37); break;
         case 38:   OX_DDR38 |=(1<<OX_P38); break;
         case 39:   OX_DDR39 |=(1<<OX_P39); break;
         case 40:   OX_DDR40 |=(1<<OX_P40); break;
         case 41:   OX_DDR41 |=(1<<OX_P41); break;
         case 42:   OX_DDR42 |=(1<<OX_P42); break;
         case 43:   OX_DDR43 |=(1<<OX_P43); break;
         case 44:   OX_DDR44 |=(1<<OX_P44); break;
         default:
	      return RSP_UNKOWN_PIN;
      }
      return RSP_OK;
   } 
   else {
      return RSP_UNKOWN_PIN;
   }
}

uint8_t  io_set_pin_direction_in(uint8_t  pin)
{
   if((pin >= 1 && pin <= 19) || (pin >=26 && pin <=44) )
   {
      octopus.ports[pin] = PIN_IN;
      switch (pin)
      {
         case 1:   OX_DDR1 &=~(1<<OX_P1); break;
         case 2:   OX_DDR2 &=~(1<<OX_P2); break;
         case 3:   OX_DDR3 &=~(1<<OX_P3); break;
         case 4:   OX_DDR4 &=~(1<<OX_P4); break;
         case 5:   OX_DDR5 &=~(1<<OX_P5); break;
         case 6:   OX_DDR6 &=~(1<<OX_P6); break;
         case 7:   OX_DDR7 &=~(1<<OX_P7); break;
         case 8:   OX_DDR8 &=~(1<<OX_P8); break;
         case 9:   OX_DDR9 &=~(1<<OX_P9); break;
         case 10:   OX_DDR10 &=~(1<<OX_P10); break;
         case 11:   OX_DDR11 &=~(1<<OX_P11); break;
         case 12:   OX_DDR12 &=~(1<<OX_P12); break;
         case 13:   OX_DDR13 &=~(1<<OX_P13); break;
         case 14:   OX_DDR14 &=~(1<<OX_P14); break;
         case 15:   OX_DDR15 &=~(1<<OX_P15); break;
         case 16:   OX_DDR16 &=~(1<<OX_P16); break;
         case 17:   OX_DDR17 &=~(1<<OX_P17); break;
         case 18:   OX_DDR18 &=~(1<<OX_P18); break;
         case 19:   OX_DDR19 &=~(1<<OX_P19); break;
         
         case 26:   OX_DDR26 &=~(1<<OX_P26); break;
         case 27:   OX_DDR27 &=~(1<<OX_P27); break;
         case 28:   OX_DDR28 &=~(1<<OX_P28); break;
         case 29:   OX_DDR29 &=~(1<<OX_P29); break;
         case 30:   OX_DDR30 &=~(1<<OX_P30); break;
         case 31:   OX_DDR31 &=~(1<<OX_P31); break;
         case 32:   OX_DDR32 &=~(1<<OX_P32); break;
         case 33:   OX_DDR33 &=~(1<<OX_P33); break;
         case 34:   OX_DDR34 &=~(1<<OX_P34); break;
         case 35:   OX_DDR35 &=~(1<<OX_P35); break;
         case 36:   OX_DDR36 &=~(1<<OX_P36); break;
         case 37:   OX_DDR37 &=~(1<<OX_P37); break;
         case 38:   OX_DDR38 &=~(1<<OX_P38); break;
         case 39:   OX_DDR39 &=~(1<<OX_P39); break;
         case 40:   OX_DDR40 &=~(1<<OX_P40); break;
         case 41:   OX_DDR41 &=~(1<<OX_P41); break;
         case 42:   OX_DDR42 &=~(1<<OX_P42); break;
         case 43:   OX_DDR43 &=~(1<<OX_P43); break;
         case 44:   OX_DDR44 &=~(1<<OX_P44); break;
         default:
	         return RSP_UNKOWN_PIN;
      }
      return RSP_OK;
   } 
   else 
   {
      return RSP_UNKOWN_PIN;
   }
}

uint8_t  io_set_pin_direction_tri(uint8_t  pin)
{
   if ((pin >= 1 && pin <= 19) || (pin >=26 && pin <=44) )
   {
      octopus.ports[pin] = PIN_TRI;
      io_set_pin_direction_out(pin);
      io_set_pin(pin,1);
      return RSP_OK;
   } 
   else 
   {
      return RSP_UNKOWN_PIN;
   }
}


void io_set_pin_direction_out_usb(uint8_t  pin)
{
   answer[0] = CMD_IO_PIN_DIRECTION_OUT;
   answer[1] = (unsigned char)io_set_pin_direction_out(pin);
   answer[2] = 0;  
   CommandAnswer(3);
}

void io_set_pin_direction_in_usb(uint8_t  pin)
{
   answer[0] = CMD_IO_PIN_DIRECTION_IN;
   answer[1] = (unsigned char)io_set_pin_direction_in(pin);
   answer[2] = 0;  
   CommandAnswer(3);
}

void io_set_pin_direction_tri_usb(uint8_t  pin)
{
   answer[0] = CMD_IO_PIN_DIRECTION_TRI;
   answer[1] = (unsigned char)io_set_pin_direction_tri(pin);
   answer[2] = 0;  
   CommandAnswer(3);
}



uint8_t io_get_port (uint8_t port, uint8_t *pvalue)
{
	uint8_t value;

	*pvalue = 0;
	switch (port)
	{
      case  1:   value = PINB; break;
      case  2:   value = PINC; break; /* PC7 = /CS */
      case  3:   value = PIND; break;
      case  4:   value = PINE; break; /* PE4 = INTR */
      case  5:   value = PINF; break;
      default:   return RSP_UNKOWN_PORT;
	}
	*pvalue = value;
	return RSP_OK;
}

void io_get_port_usb (uint8_t port)
{
	uint8_t value;

    answer[0] = CMD_IO_PORT_GET;
	answer[1] = (unsigned char)io_get_port (port, &value);
	answer[2] = (unsigned char)value;
	CommandAnswer(3);
}

uint8_t io_set_port(uint8_t port, uint8_t value)
{
	switch (port)
	{
      case  1:   PORTB = value; break;
      case  2:   PORTC = value; break; // PC7 = /CS
      case  3:   PORTD = value; break;
      case  4:   PORTE = value; break; // PE4 = INTR 
      case  5:   PORTF = value; break;
      default:   return RSP_UNKOWN_PIN;
	}
	return RSP_OK;
}

void io_set_port_usb (uint8_t port, uint8_t value)
{
	answer[0] = CMD_IO_PORT_SET;
	answer[1] = (unsigned char)io_set_port (port, value);
	answer[2] = 0;
	CommandAnswer(3);
}


void io_set_pin_usb(uint8_t pin, uint8_t value)
{
   answer[0] = CMD_IO_PIN_SET;
   answer[1] = (unsigned char)io_set_pin(pin,value);
   answer[2] = 0;
   CommandAnswer(3);
}


uint8_t io_set_pin(uint8_t pin, uint8_t value)
{
   if(octopus.ports[pin] == PIN_OUT)
   {
      switch(pin)
      {
         case 1:  if(value) OX_PORT1 |=(1<<OX_P1); else OX_PORT1 &=~(1<<OX_P1); break;
         case 2:  if(value) OX_PORT2 |=(1<<OX_P2); else OX_PORT2 &=~(1<<OX_P2); break;
         case 3:  if(value) OX_PORT3 |=(1<<OX_P3); else OX_PORT3 &=~(1<<OX_P3); break;
         case 4:  if(value) OX_PORT4 |=(1<<OX_P4); else OX_PORT4 &=~(1<<OX_P4); break;
         case 5:  if(value) OX_PORT5 |=(1<<OX_P5); else OX_PORT5 &=~(1<<OX_P5); break;
         case 6:  if(value) OX_PORT6 |=(1<<OX_P6); else OX_PORT6 &=~(1<<OX_P6); break;
         case 7:  if(value) OX_PORT7 |=(1<<OX_P7); else OX_PORT7 &=~(1<<OX_P7); break;
         case 8:  if(value) OX_PORT8 |=(1<<OX_P8); else OX_PORT8 &=~(1<<OX_P8); break;
         case 9:  if(value) OX_PORT9 |=(1<<OX_P9); else OX_PORT9 &=~(1<<OX_P9); break;
         case 10:  if(value) OX_PORT10 |=(1<<OX_P10); else OX_PORT10 &=~(1<<OX_P10); break;
         case 11:  if(value) OX_PORT11 |=(1<<OX_P11); else OX_PORT11 &=~(1<<OX_P11); break;
         case 12:  if(value) OX_PORT12 |=(1<<OX_P12); else OX_PORT12 &=~(1<<OX_P12); break;
         case 13:  if(value) OX_PORT13 |=(1<<OX_P13); else OX_PORT13 &=~(1<<OX_P13); break;
         case 14:  if(value) OX_PORT14 |=(1<<OX_P14); else OX_PORT14 &=~(1<<OX_P14); break;
         case 15:  if(value) OX_PORT15 |=(1<<OX_P15); else OX_PORT15 &=~(1<<OX_P15); break;
         case 16:  if(value) OX_PORT16 |=(1<<OX_P16); else OX_PORT16 &=~(1<<OX_P16); break;
         case 17:  if(value) OX_PORT17 |=(1<<OX_P17); else OX_PORT17 &=~(1<<OX_P17); break;
         case 18:  if(value) OX_PORT18 |=(1<<OX_P18); else OX_PORT18 &=~(1<<OX_P18); break;
         case 19:  if(value) OX_PORT19 |=(1<<OX_P19); else OX_PORT19 &=~(1<<OX_P19); break;
         
         case 26:  if(value) OX_PORT26 |=(1<<OX_P26); else OX_PORT26 &=~(1<<OX_P26); break;
         case 27:  if(value) OX_PORT27 |=(1<<OX_P27); else OX_PORT27 &=~(1<<OX_P27); break;
         case 28:  if(value) OX_PORT28 |=(1<<OX_P28); else OX_PORT28 &=~(1<<OX_P28); break;
         case 29:  if(value) OX_PORT29 |=(1<<OX_P29); else OX_PORT29 &=~(1<<OX_P29); break;
         case 30:  if(value) OX_PORT30 |=(1<<OX_P30); else OX_PORT30 &=~(1<<OX_P30); break;
         case 31:  if(value) OX_PORT31 |=(1<<OX_P31); else OX_PORT31 &=~(1<<OX_P31); break;
         case 32:  if(value) OX_PORT32 |=(1<<OX_P32); else OX_PORT32 &=~(1<<OX_P32); break;
         case 33:  if(value) OX_PORT33 |=(1<<OX_P33); else OX_PORT33 &=~(1<<OX_P33); break;
         case 34:  if(value) OX_PORT34 |=(1<<OX_P34); else OX_PORT34 &=~(1<<OX_P34); break;
         case 35:  if(value) OX_PORT35 |=(1<<OX_P35); else OX_PORT35 &=~(1<<OX_P35); break;
         case 36:  if(value) OX_PORT36 |=(1<<OX_P36); else OX_PORT36 &=~(1<<OX_P36); break;
         case 37:  if(value) OX_PORT37 |=(1<<OX_P37); else OX_PORT37 &=~(1<<OX_P37); break;
         case 38:  if(value) OX_PORT38 |=(1<<OX_P38); else OX_PORT38 &=~(1<<OX_P38); break;
         case 39:  if(value) OX_PORT39 |=(1<<OX_P39); else OX_PORT39 &=~(1<<OX_P39); break;
         case 40:  if(value) OX_PORT40 |=(1<<OX_P40); else OX_PORT40 &=~(1<<OX_P40); break;
         case 41:  if(value) OX_PORT41 |=(1<<OX_P41); else OX_PORT41 &=~(1<<OX_P41); break;
         case 42:  if(value) OX_PORT42 |=(1<<OX_P42); else OX_PORT42 &=~(1<<OX_P42); break;
         case 43:  if(value) OX_PORT43 |=(1<<OX_P43); else OX_PORT43 &=~(1<<OX_P43); break;
         case 44:  if(value) OX_PORT44 |=(1<<OX_P44); else OX_PORT44 &=~(1<<OX_P44); break;
         default:
	         return RSP_UNKOWN_PIN;
      }

      return RSP_OK;
   } 
   else 
   {
      return RSP_WRONG_PIN_CONFIG;
   } 
}


void io_get_pin_usb(uint8_t pin)
{
   uint8_t value;
   
   answer[0] = CMD_IO_PIN_GET;
   answer[1] = (unsigned char)io_get_pin(pin,&value);  
   answer[2] = (unsigned char)value;  
   CommandAnswer(3);
}

uint8_t io_get_pin(uint8_t pin, uint8_t *value)
{
	*value = 0;
	if (octopus.ports[pin] == PIN_IN)
	{
		switch (pin)
		{
		case  1:  if (OX_PIN1 & (1<<OX_P1)) *value=1; break;
		case  2:  if (OX_PIN2 & (1<<OX_P2)) *value=1; break;
		case  3:  if (OX_PIN3 & (1<<OX_P3)) *value=1; break;
		case  4:  if (OX_PIN4 & (1<<OX_P4)) *value=1; break;
		case  5:  if (OX_PIN5 & (1<<OX_P5)) *value=1; break;
		case  6:  if (OX_PIN6 & (1<<OX_P6)) *value=1; break;
        case  7:  if (OX_PIN7 & (1<<OX_P7)) *value=1; break;
		case  8:  if (OX_PIN8 & (1<<OX_P8)) *value=1; break;
		case  9:  if (OX_PIN9 & (1<<OX_P9)) *value=1; break;
		case 10:  if (OX_PIN10 & (1<<OX_P10)) *value=1; break;
		case 11:  if (OX_PIN11 & (1<<OX_P11)) *value=1; break;
		case 12:  if (OX_PIN12 & (1<<OX_P12)) *value=1; break;
		case 13:  if (OX_PIN13 & (1<<OX_P13)) *value=1; break;
		case 14:  if (OX_PIN14 & (1<<OX_P14)) *value=1; break;
		case 15:  if (OX_PIN15 & (1<<OX_P15)) *value=1; break;
		case 16:  if (OX_PIN16 & (1<<OX_P16)) *value=1; break;
		case 17:  if (OX_PIN17 & (1<<OX_P17)) *value=1; break;
		case 18:  if (OX_PIN18 & (1<<OX_P18)) *value=1; break;
		case 19:  if (OX_PIN19 & (1<<OX_P19)) *value=1; break;
		                        
		case 26:  if (OX_PIN26 & (1<<OX_P26)) *value=1; break;
		case 27:  if (OX_PIN27 & (1<<OX_P27)) *value=1; break;
		case 28:  if (OX_PIN28 & (1<<OX_P28)) *value=1; break;
		case 29:  if (OX_PIN29 & (1<<OX_P29)) *value=1; break;
		case 30:  if (OX_PIN30 & (1<<OX_P30)) *value=1; break;
		case 31:  if (OX_PIN31 & (1<<OX_P31)) *value=1; break;
		case 32:  if (OX_PIN32 & (1<<OX_P32)) *value=1; break;
		case 33:  if (OX_PIN33 & (1<<OX_P33)) *value=1; break;
		case 34:  if (OX_PIN34 & (1<<OX_P34)) *value=1; break;
		case 35:  if (OX_PIN35 & (1<<OX_P35)) *value=1; break;
		case 36:  if (OX_PIN36 & (1<<OX_P36)) *value=1; break;
		case 37:  if (OX_PIN37 & (1<<OX_P37)) *value=1; break;
		case 38:  if (OX_PIN38 & (1<<OX_P38)) *value=1; break;
		case 39:  if (OX_PIN39 & (1<<OX_P39)) *value=1; break;
		case 40:  if (OX_PIN40 & (1<<OX_P40)) *value=1; break;
		case 41:  if (OX_PIN41 & (1<<OX_P41)) *value=1; break;
		case 42:  if (OX_PIN42 & (1<<OX_P42)) *value=1; break;
		case 43:  if (OX_PIN43 & (1<<OX_P43)) *value=1; break;
		case 44:  if (OX_PIN44 & (1<<OX_P44)) *value=1; break;
		default:  return RSP_UNKOWN_PIN;
		}
		return RSP_OK;
	}
	else
	{
		return RSP_WRONG_PIN_CONFIG;
	}
}