embed xexpr-path

4 files changed, 0 insertions, 791 deletions

diff --git a/datasources/arduino/arduinoAnalogSerial/.gitignore b/datasources/arduino/arduinoAnalogSerial/.gitignore
deleted file mode 100644
index d900568..0000000
--- a/datasources/arduino/arduinoAnalogSerial/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-build-uno
diff --git a/datasources/arduino/arduinoAnalogSerial/Arduino.mk b/datasources/arduino/arduinoAnalogSerial/Arduino.mk
deleted file mode 100755
index 09819ac..0000000
--- a/datasources/arduino/arduinoAnalogSerial/Arduino.mk
+++ /dev/null
@@ -1,720 +0,0 @@
-########################################################################
-#
-# Arduino command line tools Makefile
-# System part (i.e. project independent)
-#
-# Copyright (C) 2010,2011,2012 Martin Oldfield <m@mjo.tc>, based on
-# work that is copyright Nicholas Zambetti, David A. Mellis & Hernando
-# Barragan.
-# 
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# Adapted from Arduino 0011 Makefile by M J Oldfield
-#
-# Original Arduino adaptation by mellis, eighthave, oli.keller
-#
-# Version 0.1  17.ii.2009  M J Oldfield
-#
-#         0.2  22.ii.2009  M J Oldfield
-#                          - fixes so that the Makefile actually works!
-#                          - support for uploading via ISP
-#                          - orthogonal choices of using the Arduino for
-#                            tools, libraries and uploading
-#
-#         0.3  21.v.2010   M J Oldfield
-#                          - added proper license statement
-#                          - added code from Philip Hands to reset
-#                            Arduino prior to upload
-#
-#         0.4  25.v.2010   M J Oldfield
-#                          - tweaked reset target on Philip Hands' advice
-#
-#         0.5  23.iii.2011 Stefan Tomanek
-#                          - added ad-hoc library building
-#              17.v.2011   M J Oldfield
-#                          - grabbed said version from Ubuntu
-#
-#         0.6  22.vi.2011  M J Oldfield
-#                          - added ard-parse-boards supports
-#                          - added -lc to linker opts, 
-#                            on Fabien Le Lez's advice
-#
-#         0.7  12.vii.2011 M J Oldfield
-#                          - moved -lm to the end of linker opts,
-#	                     to solve Frank Knopf's problem;
-#                          - added -F to stty opts: Craig Hollabaugh 
-#	                     reckons it's good for Ubuntu
-#
-#         0.8  12.ii.2012  M J Oldfield
-#                          - Patches for Arduino 1.0 IDE:
-#                              support .ino files;
-#                              handle board 'variants';
-#                              tweaked compile flags.
-#                          - Build a library from all the system
-#                            supplied code rather than linking the .o
-#                            files directly.
-#                          - Let TARGET default to current directory
-#			     as per Daniele Vergini's patch.
-#                          - Add support for .c files in system
-#                            libraries: Dirk-Willem van Gulik and Evan
-#                            Goldenberg both reported this and
-#                            provided patches in the same spirit.
-#
-#          0.9 26.iv.2012  M J Oldfield
-#                          - Allow the punter to specify boards.txt
-#                            file and parser independently (after
-#                            Peplin and Brotchie on github)
-#			   - Support user libraries (Peplin's patch)
-#                          - Remove main.cpp if NO_CORE_MAIN_CPP is
-#                            defined (ex Peplin)
-#                          - Added a monitor target which talks to the
-#                            Arduino serial port (Peplin's suggestion)
-#                          - Rejigged PATH calculations for general 
-#                            tidiness (ex Peplin)
-#                          - Moved the reset target to Perl for
-#                            clarity and better error handling (ex
-#                            Daniele Vergini)
-#
-#          0.10 17.ix.12   M J Oldfield
-#            - Added installation notes for Fedora (ex Rickard Lindberg).
-#            - Changed size target so that it looks at the ELF object, 
-#              not the hexfile (ex Jared Szechy and Scott Howard).
-#            - Fixed ARDUNIO typo in README.md (ex Kalin Kozhuharov).
-#            - Tweaked OBJDIR handling (ex Matthias Urlichs and Scott Howard).
-#            - Changed the name of the Debian/Ubuntu package (ex
-#              Scott Howard).
-#            - Only set AVRDUDE_CONF if it's not set (ex Tom Hall).
-#            - Added support for USB_PID/VID used by the Leonardo (ex Dan
-#              Villiom Podlaski Christiansen and Marc Plano-Lesay).
-#                      
-########################################################################
-#
-# PATHS YOU NEED TO SET UP
-#
-# I've reworked the way paths to executables are constructed in this
-# version (0.9) of the Makefile.
-#
-# We need to worry about three different sorts of file:
-#
-# 1. Things which are included in this distribution e.g. ard-parse-boards
-#    => ARDMK_DIR
-#
-# 2. Things which are always in the Arduino distribution e.g. 
-#    boards.txt, libraries, &c.
-#    => ARDUINO_DIR
-#
-# 3. Things which might be bundled with the Arduino distribution, but
-#    might come from the system. Most of the toolchain is like this:
-#    on Linux it's supplied by the system.
-#    => AVR_TOOLS_DIR
-#
-# Having set these three variables, we can work out the rest assuming
-# that things are canonically arranged beneath the directories defined
-# above.
-#
-# On the Mac you might want to set:
-#
-#   ARDUINO_DIR   = /Applications/Arduino.app/Contents/Resources/Java
-#   ARDMK_DIR     = /usr/local
-#
-# On Linux, you might prefer:
-#
-#   ARDUINO_DIR   = /usr/share/arduino
-#   ARDMK_DIR     = /usr/local
-#   AVR_TOOLS_DIR = /usr
-#
-# You can either set these up in the Makefile, or put them in your 
-# environment e.g. in your .bashrc
-#
-# If you don't install the ard-... binaries to /usr/local/bin, but
-# instead copy them to e.g. /home/mjo/arduino.mk/bin then set
-#   ARDML_DIR = /home/mjo/arduino.mk
-# 
-########################################################################
-#
-# DEPENDENCIES
-#
-# The Perl programs need a couple of libraries:
-#    YAML
-#    Device::SerialPort
-#
-########################################################################
-#
-# STANDARD ARDUINO WORKFLOW
-#
-# Given a normal sketch directory, all you need to do is to create
-# a small Makefile which defines a few things, and then includes this one.
-#
-# For example:
-#
-#       ARDUINO_LIBS = Ethernet Ethernet/utility SPI
-#       BOARD_TAG    = uno
-#       ARDUINO_PORT = /dev/cu.usb*
-#
-#       include /usr/local/share/Arduino.mk
-#
-# Hopefully these will be self-explanatory but in case they're not:
-#
-#    ARDUINO_LIBS - A list of any libraries used by the sketch (we
-#                   assume these are in
-#                   $(ARDUINO_DIR)/hardware/libraries 
-#
-#    ARDUINO_PORT - The port where the Arduino can be found (only needed
-#                   when uploading
-#
-#    BOARD_TAG    - The ard-parse-boards tag for the board e.g. uno or mega
-#                   'make show_boards' shows a list
-#
-# Once this file has been created the typical workflow is just
-#
-#   $ make upload
-#
-# All of the object files are created in the build-cli subdirectory
-# All sources should be in the current directory and can include:
-#  - at most one .pde or .ino file which will be treated as C++ after
-#    the standard Arduino header and footer have been affixed.
-#  - any number of .c, .cpp, .s and .h files
-#
-# Included libraries are built in the build-cli/libs subdirectory.
-#
-# Besides make upload you can also
-#   make             - no upload
-#   make clean       - remove all our dependencies
-#   make depends     - update dependencies
-#   make reset       - reset the Arduino by tickling DTR on the serial port
-#   make raw_upload  - upload without first resetting
-#   make show_boards - list all the boards defined in boards.txt
-#   make monitor     - connect to the Arduino's serial port
-#
-########################################################################
-#
-# SERIAL MONITOR
-#
-# The serial monitor just invokes the GNU screen program with suitable
-# options. For more information see screen (1) and search for 
-# 'character special device'.
-#
-# The really useful thing to know is that ^A-k gets you out!
-#
-# The fairly useful thing to know is that you can bind another key to
-# escape too, by creating $HOME{.screenrc} containing e.g.
-#
-#    bindkey ^C kill
-#
-# If you want to change the baudrate, just set MONITOR_BAUDRATE. If you
-# don't set it, it defaults to 9600 baud.
-#
-########################################################################
-#
-# PATHS
-#
-# I've reworked the way paths to executables are constructed in this
-# version of Makefile.
-#
-# We need to worry about three different sorts of file:
-#
-# 1. Things which are included in this distribution e.g. ard-parse-boards
-#    => ARDMK_DIR
-#
-# 2. Things which are always in the Arduino distribution e.g. 
-#    boards.txt, libraries, &c.
-#    => ARDUINO_DIR
-#
-# 3. Things which might be bundled with the Arduino distribution, but
-#    might come from the system. Most of the toolchain is like this:
-#    on Linux it's supplied by the system.
-#    => AVR_TOOLS_DIR
-#
-# Having set these three variables, we can work out the rest assuming
-# that things are canonically arranged beneath the directories defined
-# above.
-#
-# So, on the Mac you might want to set:
-#
-#   ARDUINO_DIR   = /Applications/Arduino.app/Contents/Resources/Java
-#   ARDMK_DIR     = /usr/local
-#
-# On Linux, you might prefer:
-#
-#   ARDUINO_DIR   = /usr/share/arduino
-#   ARDMK_DIR     = /usr/local
-#   AVR_TOOLS_DIR = /usr
-#
-#
-#  
-#
-########################################################################
-#
-# ARDUINO WITH ISP
-#
-# You need to specify some details of your ISP programmer and might
-# also need to specify the fuse values:
-#
-#     ISP_PROG	   = -c stk500v2
-#     ISP_PORT     = /dev/ttyACM0
-#
-# You might also need to set the fuse bits, but typically they'll be
-# read from boards.txt, based on the BOARD_TAG variable:
-#     
-#     ISP_LOCK_FUSE_PRE  = 0x3f
-#     ISP_LOCK_FUSE_POST = 0xcf
-#     ISP_HIGH_FUSE      = 0xdf
-#     ISP_LOW_FUSE       = 0xff
-#     ISP_EXT_FUSE       = 0x01
-#
-# I think the fuses here are fine for uploading to the ATmega168
-# without bootloader.
-# 
-# To actually do this upload use the ispload target:
-#
-#    make ispload
-#
-#
-########################################################################
-
-########################################################################
-# 
-# Default TARGET to cwd (ex Daniele Vergini)
-ifndef TARGET
-TARGET  = $(notdir $(CURDIR))
-endif
-
-########################################################################
-
-#
-# Arduino version number
-ifndef ARDUINO_VERSION
-ARDUINO_VERSION = 100
-endif
-
-########################################################################
-# Arduino and system paths
-#
-ifdef ARDUINO_DIR
-
-ifndef AVR_TOOLS_DIR
-AVR_TOOLS_DIR     = $(ARDUINO_DIR)/hardware/tools/avr
-# The avrdude bundled with Arduino can't find its config
-ifndef AVRDUDE_CONF
-AVRDUDE_CONF	  = $(AVR_TOOLS_DIR)/etc/avrdude.conf
-endif
-endif
-
-ifndef AVR_TOOLS_PATH
-AVR_TOOLS_PATH    = $(AVR_TOOLS_DIR)/bin
-endif
-
-ARDUINO_LIB_PATH  = $(ARDUINO_DIR)/libraries
-ARDUINO_CORE_PATH = $(ARDUINO_DIR)/hardware/arduino/cores/arduino
-ARDUINO_VAR_PATH  = $(ARDUINO_DIR)/hardware/arduino/variants
-
-else
-
-echo $(error "ARDUINO_DIR is not defined")
-
-endif
-
-########################################################################
-# Makefile distribution path
-#
-ifdef ARDMK_DIR
-
-ifndef ARDMK_PATH
-ARDMK_PATH = $(ARDMK_DIR)/bin
-endif
-
-else
-
-echo $(error "ARDMK_DIR is not defined")
-
-endif
-
-########################################################################
-# Miscellanea
-#
-ifndef ARDUINO_SKETCHBOOK
-ARDUINO_SKETCHBOOK = $(HOME)/sketchbook
-endif
-
-ifndef USER_LIB_PATH
-USER_LIB_PATH = $(ARDUINO_SKETCHBOOK)/libraries
-endif
-
-########################################################################
-# Serial monitor (just a screen wrapper)
-#
-# Quite how to construct the monitor command seems intimately tied
-# to the command we're using (here screen). So, read the screen docs
-# for more information (search for 'character special device').
-#
-ifndef MONITOR_BAUDRATE
-MONITOR_BAUDRATE = 9600
-endif
-
-ifndef MONITOR_CMD
-MONITOR_CMD = screen
-endif
-
-########################################################################
-# Reset
-ifndef RESET_CMD
-RESET_CMD = $(ARDMK_PATH)/ard-reset-arduino $(ARD_RESET_OPTS)
-endif
-
-########################################################################
-# boards.txt parsing
-#
-ifndef BOARD_TAG
-BOARD_TAG   = uno
-endif
-
-ifndef BOARDS_TXT
-BOARDS_TXT  = $(ARDUINO_DIR)/hardware/arduino/boards.txt
-endif
-
-ifndef PARSE_BOARD
-PARSE_BOARD = $(ARDMK_PATH)/ard-parse-boards
-endif
-
-ifndef PARSE_BOARD_OPTS
-PARSE_BOARD_OPTS = --boards_txt=$(BOARDS_TXT)
-endif
-
-ifndef PARSE_BOARD_CMD
-PARSE_BOARD_CMD = $(PARSE_BOARD) $(PARSE_BOARD_OPTS)
-endif
-
-# Which variant ? This affects the include path
-ifndef VARIANT
-VARIANT = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) build.variant)
-endif
-
-# processor stuff
-ifndef MCU
-MCU   = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) build.mcu)
-endif
-
-ifndef F_CPU
-F_CPU = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) build.f_cpu)
-endif
-
-# USB IDs for the Leonardo
-ifndef USB_VID
-USB_VID = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) build.vid)
-endif
-
-ifndef USB_PID
-USB_PID = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) build.pid)
-endif
-
-# normal programming info
-ifndef AVRDUDE_ARD_PROGRAMMER
-AVRDUDE_ARD_PROGRAMMER = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) upload.protocol)
-endif
-
-ifndef AVRDUDE_ARD_BAUDRATE
-AVRDUDE_ARD_BAUDRATE   = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) upload.speed)
-endif
-
-# fuses if you're using e.g. ISP
-ifndef ISP_LOCK_FUSE_PRE
-ISP_LOCK_FUSE_PRE  = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) bootloader.unlock_bits)
-endif
-
-ifndef ISP_LOCK_FUSE_POST
-ISP_LOCK_FUSE_POST = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) bootloader.lock_bits)
-endif
-
-ifndef ISP_HIGH_FUSE
-ISP_HIGH_FUSE      = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) bootloader.high_fuses)
-endif
-
-ifndef ISP_LOW_FUSE
-ISP_LOW_FUSE       = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) bootloader.low_fuses)
-endif
-
-ifndef ISP_EXT_FUSE
-ISP_EXT_FUSE       = $(shell $(PARSE_BOARD_CMD) $(BOARD_TAG) bootloader.extended_fuses)
-endif
-
-# Everything gets built in here (include BOARD_TAG now)
-ifndef OBJDIR
-OBJDIR  	  = build-$(BOARD_TAG)
-endif
-
-########################################################################
-# Local sources
-#
-LOCAL_C_SRCS    = $(wildcard *.c)
-LOCAL_CPP_SRCS  = $(wildcard *.cpp)
-LOCAL_CC_SRCS   = $(wildcard *.cc)
-LOCAL_PDE_SRCS  = $(wildcard *.pde)
-LOCAL_INO_SRCS  = $(wildcard *.ino)
-LOCAL_AS_SRCS   = $(wildcard *.S)
-LOCAL_OBJ_FILES = $(LOCAL_C_SRCS:.c=.o)   $(LOCAL_CPP_SRCS:.cpp=.o) \
-		$(LOCAL_CC_SRCS:.cc=.o)   $(LOCAL_PDE_SRCS:.pde=.o) \
-		$(LOCAL_INO_SRCS:.ino=.o) $(LOCAL_AS_SRCS:.S=.o)
-LOCAL_OBJS      = $(patsubst %,$(OBJDIR)/%,$(LOCAL_OBJ_FILES))
-
-# Dependency files
-DEPS            = $(LOCAL_OBJS:.o=.d)
-
-# core sources
-ifeq ($(strip $(NO_CORE)),)
-ifdef ARDUINO_CORE_PATH
-CORE_C_SRCS     = $(wildcard $(ARDUINO_CORE_PATH)/*.c)
-CORE_CPP_SRCS   = $(wildcard $(ARDUINO_CORE_PATH)/*.cpp)
-
-ifneq ($(strip $(NO_CORE_MAIN_CPP)),)
-CORE_CPP_SRCS := $(filter-out %main.cpp, $(CORE_CPP_SRCS))
-endif
-
-CORE_OBJ_FILES  = $(CORE_C_SRCS:.c=.o) $(CORE_CPP_SRCS:.cpp=.o)
-CORE_OBJS       = $(patsubst $(ARDUINO_CORE_PATH)/%,  \
-			$(OBJDIR)/%,$(CORE_OBJ_FILES))
-endif
-endif
-
-
-########################################################################
-# Rules for making stuff
-#
-
-# The name of the main targets
-TARGET_HEX = $(OBJDIR)/$(TARGET).hex
-TARGET_ELF = $(OBJDIR)/$(TARGET).elf
-TARGETS    = $(OBJDIR)/$(TARGET).*
-CORE_LIB   = $(OBJDIR)/libcore.a
-
-# A list of dependencies
-DEP_FILE   = $(OBJDIR)/depends.mk
-
-# Names of executables
-CC      = $(AVR_TOOLS_PATH)/avr-gcc
-CXX     = $(AVR_TOOLS_PATH)/avr-g++
-OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy
-OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump
-AR      = $(AVR_TOOLS_PATH)/avr-ar
-SIZE    = $(AVR_TOOLS_PATH)/avr-size
-NM      = $(AVR_TOOLS_PATH)/avr-nm
-REMOVE  = rm -f
-MV      = mv -f
-CAT     = cat
-ECHO    = echo
-
-# General arguments
-SYS_LIBS      = $(patsubst %,$(ARDUINO_LIB_PATH)/%,$(ARDUINO_LIBS))
-USER_LIBS     = $(patsubst %,$(USER_LIB_PATH)/%,$(ARDUINO_LIBS))
-SYS_INCLUDES  = $(patsubst %,-I%,$(SYS_LIBS))
-USER_INCLUDES = $(patsubst %,-I%,$(USER_LIBS))
-LIB_C_SRCS    = $(wildcard $(patsubst %,%/*.c,$(SYS_LIBS)))
-LIB_CPP_SRCS  = $(wildcard $(patsubst %,%/*.cpp,$(SYS_LIBS)))
-USER_LIB_CPP_SRCS   = $(wildcard $(patsubst %,%/*.cpp,$(USER_LIBS)))
-USER_LIB_C_SRCS     = $(wildcard $(patsubst %,%/*.c,$(USER_LIBS)))
-LIB_OBJS      = $(patsubst $(ARDUINO_LIB_PATH)/%.c,$(OBJDIR)/libs/%.o,$(LIB_C_SRCS)) \
-		$(patsubst $(ARDUINO_LIB_PATH)/%.cpp,$(OBJDIR)/libs/%.o,$(LIB_CPP_SRCS))
-USER_LIB_OBJS = $(patsubst $(USER_LIB_PATH)/%.cpp,$(OBJDIR)/libs/%.o,$(USER_LIB_CPP_SRCS)) \
-		$(patsubst $(USER_LIB_PATH)/%.c,$(OBJDIR)/libs/%.o,$(USER_LIB_C_SRCS))
-
-CPPFLAGS      = -mmcu=$(MCU) -DF_CPU=$(F_CPU) -DARDUINO=$(ARDUINO_VERSION) \
-			-I. -I$(ARDUINO_CORE_PATH) -I$(ARDUINO_VAR_PATH)/$(VARIANT) \
-			$(SYS_INCLUDES) $(USER_INCLUDES) -g -Os -w -Wall \
-			-DUSB_VID=$(USB_VID) -DUSB_PID=$(USB_PID) \
-			-ffunction-sections -fdata-sections
-
-CFLAGS        = -std=gnu99
-CXXFLAGS      = -fno-exceptions
-ASFLAGS       = -mmcu=$(MCU) -I. -x assembler-with-cpp
-LDFLAGS       = -mmcu=$(MCU) -Wl,--gc-sections -Os
-
-# Expand and pick the first port
-ARD_PORT      = $(firstword $(wildcard $(ARDUINO_PORT)))
-
-# Implicit rules for building everything (needed to get everything in
-# the right directory)
-#
-# Rather than mess around with VPATH there are quasi-duplicate rules
-# here for building e.g. a system C++ file and a local C++
-# file. Besides making things simpler now, this would also make it
-# easy to change the build options in future
-
-# library sources
-$(OBJDIR)/libs/%.o: $(ARDUINO_LIB_PATH)/%.c
-	mkdir -p $(dir $@)
-	$(CC) -c $(CPPFLAGS) $(CFLAGS) $< -o $@
-
-$(OBJDIR)/libs/%.o: $(ARDUINO_LIB_PATH)/%.cpp
-	mkdir -p $(dir $@)
-	$(CC) -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@
-
-$(OBJDIR)/libs/%.o: $(USER_LIB_PATH)/%.cpp
-	mkdir -p $(dir $@)
-	$(CC) -c $(CPPFLAGS) $(CFLAGS) $< -o $@
-
-$(OBJDIR)/libs/%.o: $(USER_LIB_PATH)/%.c
-	mkdir -p $(dir $@)
-	$(CC) -c $(CPPFLAGS) $(CFLAGS) $< -o $@
-
-# normal local sources
-# .o rules are for objects, .d for dependency tracking
-# there seems to be an awful lot of duplication here!!!
-$(OBJDIR)/%.o: %.c
-	$(CC) -c $(CPPFLAGS) $(CFLAGS) $< -o $@
-
-$(OBJDIR)/%.o: %.cc
-	$(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@
-
-$(OBJDIR)/%.o: %.cpp
-	$(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@
-
-$(OBJDIR)/%.o: %.S
-	$(CC) -c $(CPPFLAGS) $(ASFLAGS) $< -o $@
-
-$(OBJDIR)/%.o: %.s
-	$(CC) -c $(CPPFLAGS) $(ASFLAGS) $< -o $@
-
-$(OBJDIR)/%.d: %.c
-	$(CC) -MM $(CPPFLAGS) $(CFLAGS) $< -MF $@ -MT $(@:.d=.o)
-
-$(OBJDIR)/%.d: %.cc
-	$(CXX) -MM $(CPPFLAGS) $(CXXFLAGS) $< -MF $@ -MT $(@:.d=.o)
-
-$(OBJDIR)/%.d: %.cpp
-	$(CXX) -MM $(CPPFLAGS) $(CXXFLAGS) $< -MF $@ -MT $(@:.d=.o)
-
-$(OBJDIR)/%.d: %.S
-	$(CC) -MM $(CPPFLAGS) $(ASFLAGS) $< -MF $@ -MT $(@:.d=.o)
-
-$(OBJDIR)/%.d: %.s
-	$(CC) -MM $(CPPFLAGS) $(ASFLAGS) $< -MF $@ -MT $(@:.d=.o)
-
-# the pde -> cpp -> o file
-$(OBJDIR)/%.cpp: %.pde
-	$(ECHO) '#include "WProgram.h"' > $@
-	$(CAT)  $< >> $@
-
-# the ino -> cpp -> o file
-$(OBJDIR)/%.cpp: %.ino
-	$(ECHO) '#include <Arduino.h>' > $@
-	$(CAT)  $< >> $@
-
-$(OBJDIR)/%.o: $(OBJDIR)/%.cpp
-	$(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@
-
-$(OBJDIR)/%.d: $(OBJDIR)/%.cpp
-	$(CXX) -MM $(CPPFLAGS) $(CXXFLAGS) $< -MF $@ -MT $(@:.d=.o)
-
-# core files
-$(OBJDIR)/%.o: $(ARDUINO_CORE_PATH)/%.c
-	$(CC) -c $(CPPFLAGS) $(CFLAGS) $< -o $@
-
-$(OBJDIR)/%.o: $(ARDUINO_CORE_PATH)/%.cpp
-	$(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@
-
-# various object conversions
-$(OBJDIR)/%.hex: $(OBJDIR)/%.elf
-	$(OBJCOPY) -O ihex -R .eeprom $< $@
-
-$(OBJDIR)/%.eep: $(OBJDIR)/%.elf
-	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
-		--change-section-lma .eeprom=0 -O ihex $< $@
-
-$(OBJDIR)/%.lss: $(OBJDIR)/%.elf
-	$(OBJDUMP) -h -S $< > $@
-
-$(OBJDIR)/%.sym: $(OBJDIR)/%.elf
-	$(NM) -n $< > $@
-
-########################################################################
-#
-# Avrdude
-#
-ifndef AVRDUDE
-AVRDUDE          = $(AVR_TOOLS_PATH)/avrdude
-endif
-
-AVRDUDE_COM_OPTS = -q -V -p $(MCU)
-ifdef AVRDUDE_CONF
-AVRDUDE_COM_OPTS += -C $(AVRDUDE_CONF)
-endif
-
-AVRDUDE_ARD_OPTS = -c $(AVRDUDE_ARD_PROGRAMMER) -b $(AVRDUDE_ARD_BAUDRATE) -P $(ARD_PORT)
-
-ifndef ISP_PROG
-ISP_PROG	   = -c stk500v2
-endif
-
-AVRDUDE_ISP_OPTS = -P $(ISP_PORT) $(ISP_PROG)
-
-
-########################################################################
-#
-# Explicit targets start here
-#
-
-all: 		$(OBJDIR) $(TARGET_HEX)
-
-$(OBJDIR):
-		mkdir $(OBJDIR)
-
-$(TARGET_ELF): 	$(LOCAL_OBJS) $(CORE_LIB) $(OTHER_OBJS)
-		$(CC) $(LDFLAGS) -o $@ $(LOCAL_OBJS) $(CORE_LIB) $(OTHER_OBJS) -lc -lm
-
-$(CORE_LIB):	$(CORE_OBJS) $(LIB_OBJS) $(USER_LIB_OBJS)
-		$(AR) rcs $@ $(CORE_OBJS) $(LIB_OBJS) $(USER_LIB_OBJS)
-
-$(DEP_FILE):	$(OBJDIR) $(DEPS)
-		cat $(DEPS) > $(DEP_FILE)
-
-upload:		reset raw_upload
-
-raw_upload:	$(TARGET_HEX)
-		$(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ARD_OPTS) \
-			-U flash:w:$(TARGET_HEX):i
-
-reset:		
-		$(RESET_CMD) $(ARD_PORT)
-
-# stty on MacOS likes -F, but on Debian it likes -f redirecting
-# stdin/out appears to work but generates a spurious error on MacOS at
-# least. Perhaps it would be better to just do it in perl ?
-reset_stty:		
-		for STTYF in 'stty -F' 'stty --file' 'stty -f' 'stty <' ; \
-		  do $$STTYF /dev/tty >/dev/null 2>/dev/null && break ; \
-		done ;\
-		$$STTYF $(ARD_PORT)  hupcl ;\
-		(sleep 0.1 || sleep 1)     ;\
-		$$STTYF $(ARD_PORT) -hupcl 
-
-ispload:	$(TARGET_HEX)
-		$(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ISP_OPTS) -e \
-			-U lock:w:$(ISP_LOCK_FUSE_PRE):m \
-			-U hfuse:w:$(ISP_HIGH_FUSE):m \
-			-U lfuse:w:$(ISP_LOW_FUSE):m \
-			-U efuse:w:$(ISP_EXT_FUSE):m
-		$(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ISP_OPTS) -D \
-			-U flash:w:$(TARGET_HEX):i
-		$(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ISP_OPTS) \
-			-U lock:w:$(ISP_LOCK_FUSE_POST):m
-
-clean:
-		$(REMOVE) $(LOCAL_OBJS) $(CORE_OBJS) $(LIB_OBJS) $(CORE_LIB) $(TARGETS) $(DEP_FILE) $(DEPS) $(USER_LIB_OBJS)
-
-depends:	$(DEPS)
-		cat $(DEPS) > $(DEP_FILE)
-
-size:		$(OBJDIR) $(TARGET_ELF)
-		$(SIZE) -C --mcu=$(MCU) $(TARGET_ELF)
-
-show_boards:	
-		$(PARSE_BOARD_CMD) --boards
-
-monitor:
-		$(MONITOR_CMD) $(ARD_PORT) $(MONITOR_BAUDRATE)
-
-.PHONY:	all clean depends upload raw_upload reset reset_stty size show_boards monitor
-
-include $(DEP_FILE)
diff --git a/datasources/arduino/arduinoAnalogSerial/Makefile b/datasources/arduino/arduinoAnalogSerial/Makefile
deleted file mode 100755
index 4f66c20..0000000
--- a/datasources/arduino/arduinoAnalogSerial/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-ARDUINO_DIR= /usr/share/arduino
-ARDMK_DIR= .
-AVR_TOOLS_DIR = /usr
-
-BOARD_TAG    = uno
-ARDUINO_PORT = /dev/ttyACM0
-ARDUINO_LIBS = Ethernet Ethernet/utility SPI
-
-include Arduino.mk
diff --git a/datasources/arduino/arduinoAnalogSerial/analog.ino b/datasources/arduino/arduinoAnalogSerial/analog.ino
deleted file mode 100755
index 47bf63d..0000000
--- a/datasources/arduino/arduinoAnalogSerial/analog.ino
+++ /dev/null
@@ -1,61 +0,0 @@
-// vim: filetype=cpp expandtab shiftwidth=4 softtabstop=4
-
-const int ledPin = 13;      // select the pin for the LED
-
-const long ADC_REF_MV = 3300;
-const long ADC_MAX_STEP = 1024;
-const long OV_FACTOR = 4; // Op. Verstärker Faktor = 4; 10mV = 1dB
-
-void sendKeyValue(const char *key, const char *value) {
-    Serial.print(key);
-    Serial.print("=");
-    Serial.println(value);
-}
-
-void sendPinValue(int pin) {
-    long sensorValue,
-         sensorValueMV, 
-         sensorValueDBA;
-    char buf[12];
-    char *sensorKey = "arduino.aX", 
-         *sensorKeyMV = "arduino.aX.mv",
-         *sensorKeyDBA = "arduino.aX.dba";
-    int port = A0 + pin;
-
-    sensorValue = analogRead(port);
-    sensorKey[9] = '0' + pin;
-    snprintf(buf, 8, "%u", sensorValue);
-    sendKeyValue(sensorKey, buf);
-
-    sensorValueMV = sensorValue * (ADC_REF_MV*100/ADC_MAX_STEP);
-    sensorKeyMV[9] = '0' + pin;
-    snprintf(buf, 8, "%ld.%03ld", sensorValueMV/100, sensorValue%100);
-    sendKeyValue(sensorKeyMV, buf);
-
-    sensorValueDBA = sensorValueMV / OV_FACTOR; 
-    sensorKeyDBA[9] = '0' + pin;
-    snprintf(buf, 12, "%ld.%04ld", sensorValueDBA/1000, sensorValueDBA%1000);
-    sendKeyValue(sensorKeyDBA, buf);
-}
-
-void setup() {
-    Serial.begin(115200);
-    // declare the ledPin as an OUTPUT:
-    pinMode(ledPin, OUTPUT);  
-    // Reference is EXTERNAL (3v)
-    analogReference(EXTERNAL);
-}
-
-void loop() {
-    if (Serial.available() > 0) {
-        digitalWrite(ledPin, HIGH);
-        
-        int pin = Serial.read();
-        while (Serial.available()) Serial.read();
-
-        sendPinValue(pin-'0');
-        Serial.flush();
-
-        digitalWrite(ledPin, LOW);
-    }
-}